AI-Native Micro-Machine Maker Atomic Machines Raises $250M


Conventional manufacturing — casting, molding, machining — hits its limits in the low tens of microns. Below that, the dominant capability is semiconductor fabrication, a toolset built to do one thing extraordinarily well: pattern flat electronic circuits in silicon. The MEMS industry has coaxed about a dozen commercial device categories out of that toolset, among them accelerometers, gyroscopes and micro-mirrors, but under the field’s own maxim — “one product, one process” — each new device class takes years of custom process development. Micro-machines, one of the most promising unexplored frontiers in hardware, have stayed blocked not by physics but by manufacturing.

AI-Native Micro-Machine Maker Atomic Machines Raises $250M

Atomic Machines is going straight at that gap. The company emerged from six years in stealth on October 7 to unveil the Matter Compiler, a system that turns code directly into working three-dimensional machines, and said it has raised $250 million to date.

Two things set the Matter Compiler apart. First, it’s general-purpose: code alone determines the device produced, with moving parts, multiple materials and assembled subsystems built down to single-digit-micron features and no hard tooling of any kind, so a new device class doesn’t require engineering a new process from scratch. Second, the entire physical manufacturing system sits inside an AI feedback loop — every operation is measured with high-precision metrology and corrected in real time, and the AI runs its own experiments on its own hardware to test what simulation proposes. Design intelligence and manufacturing, in other words, were built together from day one. The name itself comes from Neal Stephenson’s novel The Diamond Age, in which matter compilers assemble objects atom-by-atom from digital specifications.

The company was founded by Jeff Holden, who joined Amazon as its 10th engineer, helped build Amazon Prime and rose to senior vice president, then became Uber’s first chief product officer, where he founded its self-driving, AI labs and air-taxi divisions. “3D printing made shapes programmable: any geometry, straight from a file. We’re making machines programmable: many materials, moving parts, sealed and wired, straight from a file,” said Holden. “When the marginal cost of a new design is the cost of the design file, you get an innovation explosion, and micro-machines are where that explosion has been waiting to happen.”

The $250 million raised to date came from OneIM, Gigafund, XTX Ventures, KAS Venture Partners, Valor Equity Partners, Tru Arrow Partners, Construct Capital, Sozo Ventures and the Regents of the University of California, without a disclosed valuation or round-by-round breakdown. “AI has made it almost trivial to create software: say what you want and it exists. The physical world has not taken that leap, because manufacturing was never built for it,” said Luke Nosek, Managing Partner at Gigafund. “The Matter Compiler will let anyone describe an arbitrary micro-machine in code and get a working device out the other end. If vibe coding is how software gets made now, this is the start of vibe manufacturing.”

PrimeSwitch, the First Machine Out

The company’s first product, born of that platform, is a power relay called PrimeSwitch. As AI data centers move to 800-volt DC distribution to feed racks of unprecedented power density, both existing ways of controlling that power hit a wall: semiconductors switch fast but lose energy as heat under continuous conduction, while electromechanical relays and contactors conduct almost losslessly but take milliseconds to open — far too slow at voltages where a fault delivers destructive energy in microseconds.

PrimeSwitch PS-150 answers that with a bistable electromechanical relay that opens in 50 microseconds, rated at 200 micro-ohms of on-resistance, 1,500 volts of galvanic isolation and 150 amps of continuous current, packed into a hermetically sealed surface-mount package 9.5mm across and 3mm thick that holds its state with zero power. Paired with a small solid-state bypass that carries current for the microseconds the contact takes to open, it’s designed to combine a mechanical contact’s conduction efficiency and isolation with solid-state-grade opening speed. No semiconductor fab can process its materials or assemble its moving parts, and no conventional tool can reach its feature sizes — the company says PrimeSwitch exists only because the Matter Compiler does. PS-150 is shipping to early-access customers now and will make its public debut at the Open Compute Project Global Summit in San Jose, October 12-15.

Two Different Fights

Atomic Machines is really competing on two separate fronts at once.

On the manufacturing-platform side — the idea of printing machines straight from code — Fab2 (formerly Atomic Semi, founded by Jim Keller and Sam Zeloof) is pursuing a “fab that builds fabs” approach to lowering the barrier to semiconductor manufacturing, and raised $500 million at a $3.7 billion valuation just last month. InchFab offers a low-cost MEMS production line built around two-inch wafers instead of standard 150-300mm substrates. Nano Dimension’s Fabrica group sells micro-3D-printing systems for MEMS and microfluidics, and ATLANT 3D focuses on atomic-layer manufacturing. A separate stealth startup, Source Foundry, raised $500 million at a $5 billion valuation this past August to challenge ASML’s near-monopoly on EUV lithography — a different market (advanced chip fabrication rather than micro-machines), but part of the same broader wave of startups betting that today’s manufacturing toolchains can’t solve the next generation of hardware problems. None of these rivals, though, claims to build complete working machines from code the way Atomic Machines does.

On the product side, PrimeSwitch is chasing a market that mostly belongs to large industrial incumbents. ABB markets what it calls the industry’s first fully IEC-certified solid-state circuit breaker, Infineon is partnering with SolarEdge on solid-state protection for 800-volt DC, and Eaton, Siemens and Schneider Electric all have their own solid-state and hybrid breaker roadmaps. Among smaller specialists, HIITIO offers a hybrid breaker lineup rated down to 20 microseconds, and Astrol has shipped liquid-cooled, IGBT-based 800-volt DC breakers. Industry roadmaps for 800-volt distribution already call for protection faster than any mechanical device on the market today. Atomic Machines’ real test, then, is a double one: keep the Matter Compiler itself uncontested as a manufacturing platform, while using it to break into a product category where entrenched industrial players are already moving fast.

Share

Leave a Reply

Your email address will not be published. Required fields are marked *